Bolt-On Body Parts: Front Fenders

The front fenders were in fairly good shape. I had to remove the usual amount of undercoating and some 1/4 inch rod someone had brazed into the fender rolls for support.

Repairs

There were a couple of tears on the edges that required patching. To make the patch, I cut out the torn piece, made a patch piece from 20 gauge AKS, tacked it in and then welded it solid. I also replaced the weld nuts that are used to attach the headlight buckets.

© 2001-2005 Chariot Software Group

Project 40 Home | Section Home